GCSE Physics Required Practical: Investigating Thermal Insulators
Revision as of 18:59, 18 March 2019 by NRJC (talk | contribs) (Created page with "==Key Stage 4== ===Meaning=== Investigate the effectiveness of different thermal insulators on reducing an energy transfer by heat...")
Contents
Key Stage 4
Meaning
Investigate the effectiveness of different thermal insulators on reducing an energy transfer by heating.
Variables
- Independent Variable: Insulating material.
- Dependent Variable: The temperature decrease of water after a given time.
- Control Variables: The volume of water used. The initial temperature of the water. The time taken between measurements. Thickness of the insulating material.
Method
- Fill a can with hot water (above 80°C).
- Place a thermometer in the water and wait until the temperature reaches 80°C.
- Begin a stopwatch when the temperature is 80°C then read the temperature every 30 seconds for 5 minutes.
- Repeat steps 1-3 with a can covered each type of insulating material.
Improving Accuracy
- Place the cans on a heatproof mat to reduce the thermal energy lost to the table surface by conduction.
- Place a lid over the cans to reduce the thermal energy lost to the air by evaporation.
- Complete the experiments with different insulators simultaneously so that a change in the temperature of the laboratory does not affect the results.
Improving Precision
- Use a thermometer with a higher resolution.
- Use a data logger rather than a thermometer.